Liquid layer between yeast layers in starter?

bastianj

I am just trying to get started with my starter for the first time, but after feeding, the starter only minimally increases in volume and then a liquid layer forms between top and bottom layers of the yeast/flour/water mixture. See photo. How do I combat this and get my starter to really rise in volume? Thank you!!!

up
344 users have voted.

Replies

phaz 2013 July 13
how thick is your starter? too thin and there's not enough structure in the starter to hold bubbles and they will just escape. I can't really tell from the pic, but it looks like there is some residue well up the sides of the jar. are you just missing the rise? an underfed starter will also produce liquid like this. how much are you feeding, and how often? and off course, what temp is the starter kept at?
bastianj 2013 July 13

it seems thick - I am using a feeding ration of 1:1:1 for starter, wheat flour, and water. I am not missing the rise - I watch it like a hawk. It is at room temp, which is usually 70-80 F. I am feeding at least once a day and am now starting any time i see any liquid accumulating.

phaz 2013 July 13
congratulations, you have hooch forming! that's a sign of an active starter, just what you want. I would increase food ratio - go 1:2:2, or feed more often. increasing ratios is a bit easier. a new starter can be a very hungry beast, and you may have to feed like 4 times a day using 1:1:1 if you're seeing hooch forming. oh, give it a good stirring here and there during the day. no problem mixing the hooch back in, and the stirring will mix up the beasties and the food, giving them access to more food. let us know how it goes!
Sadie Sofia 2023 January 24

Would 1:2:2 be starter:flour:water? 
 

I had hooch between two layers as well and a really liquid starter so I just added a bit more flour. I had been doing 50g flour and 50g water so I added 25g flour. I'm following a book and I'm really new to sourdough with more failures than successes under my belt. 

Post Reply

Already a member? Login